How To Draw A Graduation Hat And Scroll

Download Article

Download Article

A graduation cap is really recognizable and has a singled-out shape that may seem difficult to draw, but it'southward actually made of a few simple shapes. You tin can either draw the graduation cap like yous're looking down at it from the top or like you're looking up at it from the lesser. While you'll use the aforementioned basic shapes for each view of the cap, what's visible in the drawing will vary slightly. Once yous're finished, personalize your drawing with your own school's colors!

1. 1

   Draw a horizontal rhombus for the meridian of the cap. Start by drawing a straight diagonal line going upwardly from the edge of your paper. Don't make the line as well long, or else you won't exist able to fit the rest of the cap on the page. At the end of your first line, add another diagonal line going downwardly that's the same length and angle as the first ane. Make a line that is parallel to the first one you drew starting from the finish of the second line. Finally, connect the ends of the first and last line y'all drew.^[one]

   • The rhombus volition look like a sideways diamond where each side is the same length.
   • You tin apply a straightedge or ruler if you want to make the sides of your rhombus precise.

2. 2

   Add 2 slanted vertical lines down from the sides of the cap. Outset your line halfway along ane of the lesser sides of the cap. Extend the line down slightly slanted away from the centre of the cap so information technology's one-half the length of one of the rhombus's sides. Draw another diagonal line down from the center of the other bottom side so its the aforementioned length as the first one you drew.^[2]

   • The diagonal lines coming down from the top of the cap class the sides of the skullcap, which is the part that goes around your caput.

   Advertisement

3. 3

   Connect the bottoms of the slanted lines with a curved line. Begin at the end of ane of the slanted lines, and sketch a tiresome arch down going toward the other slanted line. Brand the everyman point of the curvation line up with the heart of your rhombus to make the chapeau look similar information technology'southward in perspective. Connect the end of the curved line to the end of the slanted line on the other side to end the skullcap.^[3]

   • Sketch in your lines lightly only in instance you have to erase and depict the curved line once again.

   Tip: The bottoms of some graduation caps come to a point in the middle. If you lot want to add a point to the bottom of the skull cap, draw upward arches coming from the ends of the slanted lines. The ends of the arches will form a indicate in the middle of the cap.
   

4. 4

   Brand a pocket-sized oval in the eye of the rhombus for the button. The lath of a graduation cap unremarkably has a push button that holds the tassel in place. Find the eye of the rhomb yous drew and draw a horizontal oval that's nearly the size of your fingernail.^[4]

5. five

   Sketch 2 parallel lines curving over 1 side of the cap to draw the cord. The string from the tassel hangs down straight from the button. Draw a line coming from the side of the push button and extend information technology to one of the lesser sides of the cap. Once yous accomplish the side of the cap, curve the line down to make information technology look similar information technology's hanging over the edge. Stop the line halfway down the sides of the skullcap. Make another line that'due south parallel to the first one you drew so at that place's a pocket-sized gap between them to cease the string.^[5]

   • Y'all can draw the string coming downwardly from either the left or correct side of the button.

6. 6

   Describe the tassel on the end of the parallel lines. The tassel on a graduation is made upwards of many strings tied together that hangs down from the cap. Draw a small circle at the ends of the parallel lines to form the base of the tassel. And then draw directly lines coming down from the sides of the circle for the strings. Shut the bottom of the tassel with a horizontal zig-zag line to make information technology expect like the ends of the strings are unlike lengths.^[6]

   • If you lot want to add more than detail to the tassel, brand direct vertical lines coming downwardly from the circle to make information technology await similar the private strings.

7. 7

   Finished.

   Advertisement

1. ane

   Make a horizontal oval near the lesser of your newspaper. Start in the middle of your newspaper so you lot accept room to draw the top of the cap after on. Draw a narrow, horizontal oval and then the middle of the page lines up with the middle of the shape. The oval will be the bottom of the skullcap where you put your head.^[vii]

   • The residue of the cap will be about twice the length equally the oval, so don't make the oval likewise large or else your drawing won't fit.

2. 2

   Depict 2 slightly angled vertical lines coming up from the ends of the oval. Begin your line on the left side of the oval, and extend information technology upwards at a slight bending toward the center. Make the line so it'due south about half the length of the oval so it doesn't extend too tall. Make another slanted line coming upwardly from the right side of the oval to form the other side of the skullcap.^[8]

   • Depict your lines and then they're the same length, or else the graduation cap won't look right when you're finished.

3. 3

   Sketch in a curved line on tiptop to finish the skullcap. Put your pencil on the end of the slanted line on the left side, and depict an up curvation so the highest point lines upwardly with the center of the oval. Curve the line back down so it connects with the end of the slanted line on the right.^[ix]

   • The shape of the skull cap will wait like a cylinder with a slightly wider bottom when yous're done.

4. iv

   Draw 2 diagonal lines coming out from the sides of the cylinder. Begin on the left side of the skullcap so you lot're about a tertiary of the way down from the top. Brand a straight, diagonal line extending out from the side that'due south about half the length of the oval. Then draw another diagonal line on the right side of the cap that's the same length.^[10]

   • These lines will be the dorsum of the board that's on top of the graduation cap.

5. 5

   Put in 2 angled lines that come to a bespeak to make the top of the cap. Start at the finish of the diagonal line on the left side of the cap. Lightly sketch a diagonal line going up toward the eye of the cap so it's parallel with the bottom line on the correct side. And then draw a line coming from the terminate of the diagonal line on the correct and so information technology'south parallel with the bottom left line. The 2 lines y'all drew form a point that lines up with the heart of the cap.^[11]

   • The elevation shape of your cap will look like a sideways diamond.
   • You volition not be able to see the push button on the elevation of the cap.

6. 6

   Add the tassel coming downwards from i side of the cap. Choose the halfway point on the top of the cap on either the left or correct side. Draw 2 parallel lines coming down from the meridian of the cap so they stop a third of the style downward the side of the skullcap. Make a circle the size of your fingernail at the ends of the line. Add together a rectangular shape connecting to the bottom of the circle and then information technology hangs downwardly past the bottom of the cap to finish the tassel.^[12]

   • You can add direct vertical lines inside the tassel if you want to add more than particular to it.

7. 7

   Finished.

   Advertisement

Add together New Question

• Question

  How do I refine my cartoon?

  

  Ali Ali sa'eed

  Community Answer

  First depict with light lines. When you lot get the perfect shape, outline it with dark lines or a marker.

• Question

  Does it affair if I refine it?

  

  Fullmetal17

  Customs Answer

  No, but it might make the drawing await a piddling more than like you are a professional artist. This decision is completely up to you, though.

• Question

  Is a rhombus same matter equally a square simply at a different angle?

  

  CaTsArEsOcUtE

  Community Answer

  A rhombus is a diamond shape, it may exist longer on sides than a square, but it is used to show a foursquare at an bending, so yes.

• Question

  What if you need to put it on a person?

  

  Depending on the angle that you drew the person in, draw the cap from in a higher place on top of their caput so that they're wearing it, or draw information technology from beneath then that they're wearing it.

• Question

  How did you lot draw the tassels

  

  They are made by drawing a modified triangle with lines coming from the top and the bottom, in varying lengths.

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Color in your graduation cap with your school colors if you want it to expect similar your own.

• Many people decorate their graduation caps with different words and designs. Add fun colors or phrases on the top of the cap if yous want to make information technology look more festive.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

• Pencil
• Paper
• Eraser

About This Article

Thanks to all authors for creating a folio that has been read 149,525 times.

Did this article help you lot?

Source: https://www.wikihow.com/Draw-a-Graduation-Cap

Posted by: pullinsciarger.blogspot.com

Share this post